How much Christmas lights do I need for my house? General Rule: For heavy lighting, plan for around 200 mini Christmas tree lights per vertical foot-and-a-half of tree. If you prefer medium lighting, 100 mini lights per foot should be enough.
Then, How many feet of Christmas lights do I need for my house?
When decorating your house eaves, a simple rule is to start with at least 60 feet of string lights. Add another 10 to 12 feet for every awning you plan to light. If you have the time and patience, you can measure your eaves and awnings with measuring tape to get the most precise necessary length of string lights.
Secondly, How do I light my house for Christmas?
How do you put Christmas lights on your house?
How do you hide unwanted Christmas lights?
What are Christmas lights called?
Christmas lights (also called twinkle lights, holiday lights, mini lights or fairy lights), that are strands of electric lights used to decorate homes, public/commercial buildings and Christmas trees during the Christmas season are amongst the most recognized form of Christmas lighting.
Should you tape Christmas light connections?
Don’t assume all lights are designed for outdoor use; wrap all connections between strings with electrical tape to keep moisture out. Always plug lights into a covered outlet protected with a ground-fault circuit interrupter (GFCI)—running cords from inside the house through a window or a mail slot is a fire hazard.
How do you attach string lights to a house?
How to Hang Outdoor String Lights
- Step 1: Measure & Prep. The first thing to do is measure for both your string lights and the cable guide wire you need for spanning across any open spaces. …
- Step 2: Mount Screw Hooks. …
- Step 3: Connect & Tighten Cable. …
- Step 4: Attach Your String Lights. …
- Step 5: Sit Back and Enjoy!
How do you hang Christmas lights on a house without gutters?
Plastic Clips are Your Friend
Instead, use plastic clips. There are a variety of clips that let you hang Christmas lights without causing damage to your roof or sides of your home. They work by clipping onto the gutters, shingles or eaves of your home.
How do you attach Christmas lights to fascia?
Push a clip onto the fascia board near the edge of the board with the hook for the light strand facing out. Clip the light strand into the hook. If you are using clothespins, hold the end of the light strand against the fascia board edge and clip it in place with the clothespin.
How do you power Christmas lights outside?
Let’s explore the options.
- Use Existing External Outlets.
- Run an Extension Cord from Inside the Home.
- Use Solar Lights or Panels.
- Using Batteries to Power Outdoor Lights.
- 12 Volt Batteries Can be Used.
- Safety Precautions when Using Electricity and String Lights.
- The Don’ts of Extension Cords.
- Pay Attention to Wattage.
How do you put Christmas lights up?
How do you use DMX Christmas lights?
Can U Cut Christmas lights?
The lights are designed so each bulb receives all 120 volts and each bulb has a direct route to power, meaning they can be cut to any length without overpowering and burning out bulbs. With the lights unplugged cut wires with wire cutters between the bulbs and cap each end with wire connectors.
What do you do if your Christmas lights are too long?
What am I supposed to do? Unfortunately, there isn’t too much that can be done at the end of a run if there are a few leftover inches/feet of Christmas light strings. Wind them up, secure the coil with electrical tape and tuck the rest of the light string out of the way. Wire ties can be handy at times like this.
Can you cut off extra string lights?
Yes, it is possible to cut string lights to the desired length, but you cannot plug them in until you are sure they have been cut and repaired. … Make sure the string lights are unplugged before you try to change the length. If this precaution is not taken seriously, there is a risk of electrocution.
What is a stackable male plug?
Stackable Plugs – Plugs that have male connector on one side and a female connector on the other side that allows multiple plugs to be stacked in a series. T5 – LED mini light bulb that has the same shape of traditional incandescent mini lights.
Are LED Christmas lights better?
LED Christmas lights use light-emitting diodes, rather than filament, to produce light. This makes LED lights more efficient, durable, and longer-lasting than fluorescent incandescent lights. They don’t burn out, like other bulbs; and they also don’t get hot to the touch, so they’re a lot safer, too.
What color were the first Christmas lights?
Edward H. Johnson put the very first string of electric Christmas tree lights together in 1882. Johnson, Edison’s friend and partner in the Edison’s Illumination Company, hand-wired 80 red, white and blue light bulbs and wound them around his Christmas tree.
Is it OK to leave Christmas lights on in the rain?
As long as they’re outdoor lights, they can handle rain. The main concern is the 2 prongs on the plug. If water bridges those prongs, you’re going to blow a fuse and maybe see some sparkies fly.
Why do my Christmas lights go out in the rain?
Unfortunately, when it comes to Christmas lights and decorations and GFCIs, generally all it takes to trip a circuit is for a little moisture to get into the outlet, cord, or lights. If this happens and the power is on, the circuit will trip, causing the lights and décor to go out.
Are Christmas lights rain proof?
When we’re talking about electronics: every light, wire, and connector has what is called an IP, or “Ingress Protection” rating. … But no connector in Christmas lighting is truly 100% waterproof. While they will stay dry most of the time, it’s those few times that they get wet that drive us crazy!
Sharing is caring, don’t forget to share this post !
