How do you hang string lights without holes? Using Hooks
If you can’t repurpose your backyard to hang the lights, then the next best option is to go with adhesive hooks. They can be bought at any hardware store and allow you to hang lights without leaving nail holes in your walls.
Likewise, How do I get more power out of my Christmas lights?
You could get away with six of these strings on a single circuit, but five is a safer bet. Keep in mind that this is just the total for the Christmas lights; if anything else is using the same circuit, there will be less power available for the lights.
Thereof, How do you hang lights with Command Strips?
How do you hang lights with nails?
Use nails, thumb tacks, or clear wall hooks to hang the lights up.
- Match the color of the nail or thumb tack to the color of the wire.
- Drive the nails or thumb tacks between the twisted wires. Never drive them through the wires.
How do you attach string lights to a house?
How to Hang Outdoor String Lights
- Step 1: Measure & Prep. The first thing to do is measure for both your string lights and the cable guide wire you need for spanning across any open spaces. …
- Step 2: Mount Screw Hooks. …
- Step 3: Connect & Tighten Cable. …
- Step 4: Attach Your String Lights. …
- Step 5: Sit Back and Enjoy!
How do I stop my outdoor Christmas lights from tripping?
Plug the Christmas lights into your Ground Fault Circuit Interrupter (GFCI), or outdoor outlet. Wrap Teflon tape (electrical tape) securely and carefully around the plugs, completely coating the plug to prevent water from getting in and effectively creating a water-tight seal.
How do you hang Christmas lights without blowing fuses?
Plug lights into the nearest outlet or use an extension cord to keep from breaking wires in the lighting strands. For outdoor decoration, plug lights into circuits with a ground fault circuit interrupter (GFCI).
How many strands of Christmas lights can you connect?
In this case, most traditional incandescent Christmas mini lights only allow you to connect 4 or 5 sets end to end but with many LED mini light strings you can connect 40 to 50+ together depending on the light count. Consider your circuits: Most household circuits are 15 or 20 amps.
Do Command hooks work for Christmas lights?
Outdoor Command Clips let you hang Christmas lights, rope lights, decorations and more where you want without tools or nails.
How do you hang LED strips without adhesive?
Will command strips hold LED lights?
Be careful not to oversaturate and water damage your LEDs. From here, you can select a new adhesive. This could be more W3 tape, extra-strong double-sided tape, Command strips, glue dots, or adhesive clips. The possibilities are endless.
Can you use nails to hang string lights?
before I came up with this genius solution while aimlessly wandering the aisles of Home Depot: They’re clips with little tiny nails that you hammer in, and then you can pop the wire in and out of the clips, so you can hang, remove, and re-hang your outdoor lights without having to break out a hammer every time.
Can I hang string lights with nails?
String lights are brighter and heavier. They look more old-fashioned, bulky and generally have fewer bulbs along the strand. You’ll usually need nails or a staple gun to hang them. You can buy these online or in your local Target or Lowe’s.
How do you put lights on the wall without nails?
Luckily there are a number of alternative ways to hang or display fairy lights.
- Drawing Pins. …
- Blu-Tack. …
- Wrapping around household objects. …
- Wire Suckers. …
- Damage-free Adhesive Hooks.
How do you fasten outdoor string lights?
How to Hang Outdoor String Lights from Trees
- First, measure the distance from tree to tree where you want to hang the lights. …
- Drill guide holes on the trees where you want to hang the lights. …
- Install a hook into each tree at the marked spot. …
- Thread the string lights onto the hooks.
How do you hold string lights up?
String Light Tips
Hang the lights first, then screw in the bulbs once everything else is in place. It’s easy to break the bulbs while hanging the wires. In fact the industrial lights actually come with the bulbs in a separate box. Hang onto the empty box so you’ll have a place to stow your lights in the off-season.
How do I hang string lights in my backyard?
If you have an existing structure, hanging string lights is easy. Just attach cup hooks every yard or so along a covered patio, porch or pergola. You can crisscross the lights or follow the line of the roof or porch beams.
Do you need to tape Christmas lights?
Why do my outside lights keep tripping when it rains?
Frayed extension cord-Old extension cords become frayed. When it rains, water can make its way into the cord, cause a short and trip the breaker. … So after a good rain, water can get in the cord and cause the tripping breaker.
Is it OK to leave Christmas lights on in the rain?
As long as they’re outdoor lights, they can handle rain. The main concern is the 2 prongs on the plug. If water bridges those prongs, you’re going to blow a fuse and maybe see some sparkies fly.
Why do Christmas lights have 2 fuses?
Typically, these strings of lights have two tiny fuses, one in each side of the AC line, located inside the AC plug. The fuses are intended to melt or “blow” before the copper wires in the string could melt or cause a fire from overload. … Sometimes the instructions with the lights say, for example: “DO NOT OVERLOAD.
What causes a fuse to keep blowing?
First, and most commonly, when too many lights or plug-in appliances draw power from the circuit, it can overload the capacity of the fuse and cause the metal ribbon inside the fuse to melt through. … A mis-wired lamp, for example, can cause a short circuit and blown fuse if it is plugged into an outlet.
How do you know which fuse is blown on Christmas lights?
Step 1 Blown Fuses
With the plug in hand, slide the door marked “Open” in the direction pointed by the arrow. Remove the two fuses, and inspect them by looking at them up against a bright background (such as the sky). If the fuse is good, you should see an unbroken strand of wire running between the two metal contacts.
Sharing is caring, don’t forget to share this post !
