How do you hang Christmas lights without shingles or gutters?

How do you hang Christmas lights without shingles or gutters? Hang the lights pointing up or down, just make sure they’re all clipped in the same direction. If you don’t have gutters, you can use the same clip to attach lights to your shingles instead. Simply flip the clip around.

Likewise, How do you fasten outdoor string lights?

How to Hang Outdoor String Lights from Trees

1. First, measure the distance from tree to tree where you want to hang the lights. …
2. Drill guide holes on the trees where you want to hang the lights. …
3. Install a hook into each tree at the marked spot. …
4. Thread the string lights onto the hooks.

Thereof, How can I hang Christmas lights without clips? Purchase S-shaped gutter hooks at the home improvement store, and hang them up by pressing the top part of the S into the gutter, with the rest of the hook resting on the front. When you’re ready to hang the lights, simply use the bottom part of the S as a hook and string the wire of the lights into each hook.

How do you attach string lights to a house?

How to Hang Outdoor String Lights

1. Step 1: Measure & Prep. The first thing to do is measure for both your string lights and the cable guide wire you need for spanning across any open spaces. …
2. Step 2: Mount Screw Hooks. …
3. Step 3: Connect & Tighten Cable. …
4. Step 4: Attach Your String Lights. …
5. Step 5: Sit Back and Enjoy!

How do you hang Christmas lights without damaging them?

Install

1. Use light clips. Do not hang Christmas lights with screws, nails or even a staple gun. …
2. Attach your light clips. If your strands don’t already have light clips attached, attach them on the ground before you climb the ladder. …
3. Be careful.

How do you hang string lights outside without trees?

7 Ways on How To Hang String Lights in Backyard Without Trees

1. Hanging Lights on 4X4 Posts.
2. Using Metal Pole and PVC. …
3. Along the Fence Lighting.
4. Deck Lighting.
5. Gazebo or Pergola or Covered Patio String Lights.
6. String Lights on Umbrella.
7. Use Planters to String Backyard Lights.

How do you hang string lights without holes?

Using Hooks

If you can’t repurpose your backyard to hang the lights, then the next best option is to go with adhesive hooks. They can be bought at any hardware store and allow you to hang lights without leaving nail holes in your walls.

How high should you hang outdoor string lights?

For most string lights, about eight to 10 feet is perfect. If you have larger bulbs, you may want to hang the lights a little higher.

Is it OK to staple Christmas lights to house?

Staples Are For Paper, Not Your Home

“Any penetration through your roofing materials can lead to damaging leaks.” Not only will staples damage your home, you could also damage the lights. One staple misfire can ruin an entire strand of lights. So, the first rule for safe decorating: Put down the staple gun.

How do you secure Christmas lights to Brick?

How do you hang lights with Command Strips?

How do you hang LED strips without adhesive?

How do you hang string lights on a patio?

1. Step 1: Select Anchor Points. Lay string lights around the perimeter of your deck. …
2. Step 2: Install Screw Eyes. Predrill holes into the wood structural supports in your marked locations. …
3. Step 3: Attach String Lights with Carabiners. …
4. Step 4: Install Light Bulbs. …
5. Step 5: Attach String Lights to Power.

What kind of pole do you use for string lights?

Long vertical poles secured with concrete footings are an easy way to support twinkling string lights and are sturdy enough to stay up for the entire summer season. A little carpentry work and a few basic supplies are all that’s required, and this DIY project can be done in one day.

How do you hang bistro lights on a patio?

Hang your first patio light string with the male plug closest to your outlet. Use zip ties or hooks between each bulb as needed on deck railings or other structures. If applicable, attach the strings to your guy wire as you go.

How do you hang lights with nails?

Use nails, thumb tacks, or clear wall hooks to hang the lights up.

1. Match the color of the nail or thumb tack to the color of the wire.
2. Drive the nails or thumb tacks between the twisted wires. Never drive them through the wires.

Can you leave string lights out in winter?

Yes you can leave them in freezing weather. If its windy youy may have to replace a few bulbs.

How do you hang outdoor lights on concrete?

How do you hang lights in a room without nails?

Luckily there are a number of alternative ways to hang or display fairy lights.

1. Drawing Pins. …
2. Blu-Tack. …
3. Wrapping around household objects. …
4. Wire Suckers. …
5. Damage-free Adhesive Hooks.

What staples to use for Christmas lights?

The 5/16” x 5/16” staples should be large enough for most light strands and garland. Time to hang the decorations! Make certain that no lights are plugged into the outlets while securing to your porch. Use Arrow’s T59 insulated cable staple gun to secure the strands, fastening every 6 to 8 inches for a secure hold.

How do you attach Christmas lights to fascia?

Push a clip onto the fascia board near the edge of the board with the hook for the light strand facing out. Clip the light strand into the hook. If you are using clothespins, hold the end of the light strand against the fascia board edge and clip it in place with the clothespin.

Sharing is caring, don’t forget to share this post !