Does Walmart hang Christmas lights? Walmart, in partnership with Handy, will hang your lights for you. … To get lights installed, simply add Christmas Lights Installation Service to your cart. After checkout, Handy will reach out via email to schedule an installation appointment. You just need to supply the lights, clips or anchors, and extension cords.
Then, How many feet of Christmas lights do I need for my house?
When decorating your house eaves, a simple rule is to start with at least 60 feet of string lights. Add another 10 to 12 feet for every awning you plan to light. If you have the time and patience, you can measure your eaves and awnings with measuring tape to get the most precise necessary length of string lights.
Secondly, How many strands of Christmas lights do I need for my house? General Rule: Plan for approximately 100 mini Christmas tree lights per vertical foot-and-a-half of tree. Strands with a 4-inch bulb spacing will light more area at a lower cost.
How do you hide unwanted Christmas lights?
How many strands of Christmas lights do I need?
How many strands do I need? A good rule of thumb is 100 lights for every 1.5 feet of tree. However, if you love lights, you may want to double, or even triple, that amount.
Should you wrap Christmas lights with electrical tape?
Don’t assume all lights are designed for outdoor use; wrap all connections between strings with electrical tape to keep moisture out. Always plug lights into a covered outlet protected with a ground-fault circuit interrupter (GFCI)—running cords from inside the house through a window or a mail slot is a fire hazard.
How many strings of lights can you put together?
1440/100= 14.4. Therefore, your circuit can only handle 14 incandescent light strings connected together. On the other hand, if an average LED string light set uses 10 watts, then 1440/10=144. That means you can have 144 light strings connected together if they’re LED!
How many strands of lights can you string together?
In this case, most traditional incandescent Christmas mini lights only allow you to connect 4 or 5 sets end to end but with many LED mini light strings you can connect 40 to 50+ together depending on the light count. Consider your circuits: Most household circuits are 15 or 20 amps.
How do you hang Christmas lights professionally?
Why do Christmas lights have 3 wires?
The string of light is designed to daisy chain. The end of one can plug into the start of the next one. The lights are in series between the neutral at one end and the hot at the other end. Thus three wires – hot, neutral, and the series lights.
Can I cut off extra Christmas lights?
Short Answer: No, you can’t lengthen or shorten standard series-wired incandescent and LED Christmas tree light strings that are made with 2 or 3-wire harnesses. Even if they work at first, they won’t last long.
How many strands of lights can you connect?
In this case, most traditional incandescent Christmas mini lights only allow you to connect 4 or 5 sets end to end but with many LED mini light strings you can connect 40 to 50+ together depending on the light count. Consider your circuits: Most household circuits are 15 or 20 amps.
Are LED Christmas lights better?
LED Christmas lights use light-emitting diodes, rather than filament, to produce light. This makes LED lights more efficient, durable, and longer-lasting than fluorescent incandescent lights. They don’t burn out, like other bulbs; and they also don’t get hot to the touch, so they’re a lot safer, too.
How many feet of Christmas lights do I need for a 20 foot tree?
“A good rule of thumb is 100 lights for every foot-and-a-half of tree,” according to Lowe’s. But Better Homes & Gardens recommends using three 100-light sets for every foot of a tree’s height. And Real Simple suggests 100 lights for every foot.
Is it OK to leave Christmas lights on in the rain?
As long as they’re outdoor lights, they can handle rain. The main concern is the 2 prongs on the plug. If water bridges those prongs, you’re going to blow a fuse and maybe see some sparkies fly.
Why do my Christmas lights go out in the rain?
Unfortunately, when it comes to Christmas lights and decorations and GFCIs, generally all it takes to trip a circuit is for a little moisture to get into the outlet, cord, or lights. If this happens and the power is on, the circuit will trip, causing the lights and décor to go out.
Are Christmas lights rain proof?
When we’re talking about electronics: every light, wire, and connector has what is called an IP, or “Ingress Protection” rating. … But no connector in Christmas lighting is truly 100% waterproof. While they will stay dry most of the time, it’s those few times that they get wet that drive us crazy!
What happens if you plug too many Christmas lights together?
Because light strings have a maximum wattage capacity, which is why many string lights come with a little fuse just in case you connect too many together at once. The fuse is designed to blow so you don’t overload and damage your Christmas lights. … This happens when your wattage exceeds the amp capacity of the circuit.
How many extension cords can you connect together for Christmas lights?
A good rule of thumb is not to exceed 1000 watts on a single household breaker. (Note that’s breaker not outlet. Multiple outlets can connect to a single breaker so keep that in mind.) So if your light strings are rated at 40 watts per string, you can run a maximum of 25 strings of that rating on one breaker.
How do you connect two Christmas lights together?
Should Christmas lights face up or down?
Hang the lights pointing up or down, just make sure they’re all clipped in the same direction. If you don’t have gutters, you can use the same clip to attach lights to your shingles instead.
How do you attach Christmas lights to the peak of the house?
Climb higher along the peak to attach the next lights on the strand. Go slightly higher on your roof, and pull the light strand tight so it forms a straight line rather than bowing in between the clips. Slide clips underneath your shingles and set the bulbs in the rings until you’ve gone to the top of the peak.
What is the difference between C9 and C7 Christmas lights?
C7 bulbs are smaller than C9s. They have an E12 candelabra base, the same size as a night light bulb. … C9 bulbs are larger, over 2 inches long, and fit an E17 base. They are usually available in 7 or 10 watts for incandescent bulbs and are generally used in the same ways as a C7 bulb.
Sharing is caring, don’t forget to share this post !
