How much Christmas lights do I need for my house? General Rule: For heavy lighting, plan for around 200 mini Christmas tree lights per vertical foot-and-a-half of tree. If you prefer medium lighting, 100 mini lights per foot should be enough.
Then, Are professional Christmas lights worth it?
The benefits of professional quality Christmas lights make them more than worth the fact that they are more expensive than what you will find in a retail store. First, pro-grade Christmas lights utilize a one-piece design. This means that the LED diode and lens are in a single sealed socket.
Secondly, How do I light my house for Christmas?
How do you put Christmas lights on your house?
How do you hide unwanted Christmas lights?
What is the difference between commercial and residential Christmas lights?
First of all, commercial grade C9s will be much brighter. Each commercial grad C9 bulb has 5 diodes, as opposed to the one diode you get with residential grade. In fact, the residential grade lights are just a mini light (like you would wrap a tree or shrub with) that has a C9 bulb screwed on top of it.
Do LED Christmas lights last longer?
Depending on the LED, the bulb may last from 50,000 hours to 200,000 hours as compared to the 3,000 hours of an incandescent light. LEDs are also more durable and do not burn out, thus lasting longer than incadescents.
What are Christmas lights called?
Christmas lights (also called twinkle lights, holiday lights, mini lights or fairy lights), that are strands of electric lights used to decorate homes, public/commercial buildings and Christmas trees during the Christmas season are amongst the most recognized form of Christmas lighting.
How do you attach string lights to a house?
How to Hang Outdoor String Lights
- Step 1: Measure & Prep. The first thing to do is measure for both your string lights and the cable guide wire you need for spanning across any open spaces. …
- Step 2: Mount Screw Hooks. …
- Step 3: Connect & Tighten Cable. …
- Step 4: Attach Your String Lights. …
- Step 5: Sit Back and Enjoy!
How do you hang Christmas lights on a house without gutters?
Plastic Clips are Your Friend
Instead, use plastic clips. There are a variety of clips that let you hang Christmas lights without causing damage to your roof or sides of your home. They work by clipping onto the gutters, shingles or eaves of your home.
How do you attach Christmas lights to fascia?
Push a clip onto the fascia board near the edge of the board with the hook for the light strand facing out. Clip the light strand into the hook. If you are using clothespins, hold the end of the light strand against the fascia board edge and clip it in place with the clothespin.
How do you power Christmas lights outside?
Let’s explore the options.
- Use Existing External Outlets.
- Run an Extension Cord from Inside the Home.
- Use Solar Lights or Panels.
- Using Batteries to Power Outdoor Lights.
- 12 Volt Batteries Can be Used.
- Safety Precautions when Using Electricity and String Lights.
- The Don’ts of Extension Cords.
- Pay Attention to Wattage.
How do you put Christmas lights up?
How do you use DMX Christmas lights?
Can U Cut Christmas lights?
The lights are designed so each bulb receives all 120 volts and each bulb has a direct route to power, meaning they can be cut to any length without overpowering and burning out bulbs. With the lights unplugged cut wires with wire cutters between the bulbs and cap each end with wire connectors.
What do you do if your Christmas lights are too long?
What am I supposed to do? Unfortunately, there isn’t too much that can be done at the end of a run if there are a few leftover inches/feet of Christmas light strings. Wind them up, secure the coil with electrical tape and tuck the rest of the light string out of the way. Wire ties can be handy at times like this.
Can you cut off extra string lights?
Yes, it is possible to cut string lights to the desired length, but you cannot plug them in until you are sure they have been cut and repaired. … Make sure the string lights are unplugged before you try to change the length. If this precaution is not taken seriously, there is a risk of electrocution.
Does anyone make Christmas lights that last?
The one-piece design is a primary factor in making pro grade lights so much more durable than retail grade lights. In fact, pro-grade bulbs are rated to last for an astounding 75,000 hours – far longer than a typical light set is likely to be in use.
What kind of Christmas lights do pros use?
Commercial LED light strings with co-axial connectors are one of the most popular styles of commercial Christmas lights among professional installers due to their exceptional durability.
What Christmas lights last longest?
LED Christmas lights use light-emitting diodes, rather than filament, to produce light. This makes LED lights more efficient, durable, and longer-lasting than fluorescent incandescent lights. They don’t burn out, like other bulbs; and they also don’t get hot to the touch, so they’re a lot safer, too.
Why do LED Christmas lights look blue?
The first white LED Christmas lights that were developed fell into the cool white category. During the first few years of development, it was simply too costly to create true white or warm white LED Christmas lights, as a result, there was always a blue tint to the lights.
What is the difference between LED and regular Christmas lights?
LED Christmas lights use light-emitting diodes, rather than filament, to produce light. This makes LED lights more efficient, durable, and longer-lasting than fluorescent incandescent lights. They don’t burn out, like other bulbs; and they also don’t get hot to the touch, so they’re a lot safer, too.
Do LED Christmas lights stay on if one burns out?
It is important to note that some sets are more prone to outages due to broken bulbs. … So the bottom line is that if one bulb goes out, but it’s still intact, then yes, the light set will stay lit. But if the LED lens is significantly cracked or damaged, then anywhere from half to the full set will go out.
Sharing is caring, don’t forget to share this post !
