How do you fasten outdoor string lights?

How do you fasten outdoor string lights? How to Hang Outdoor String Lights from Trees

1. First, measure the distance from tree to tree where you want to hang the lights. …
2. Drill guide holes on the trees where you want to hang the lights. …
3. Install a hook into each tree at the marked spot. …
4. Thread the string lights onto the hooks.

Likewise, How do you hang Christmas lights without shingles or gutters?

Hang the lights pointing up or down, just make sure they’re all clipped in the same direction. If you don’t have gutters, you can use the same clip to attach lights to your shingles instead. Simply flip the clip around.

Thereof, How do you hang string lights without holes? Using Hooks

If you can’t repurpose your backyard to hang the lights, then the next best option is to go with adhesive hooks. They can be bought at any hardware store and allow you to hang lights without leaving nail holes in your walls.

How do you connect string lights together?

Turnbuckles connect to one end of each strand, directly to the eye bolt, and minimize torsion from wind. Just loop your cables into the eye bolts (or turnbuckles) and lock them in place with wire clamps. After these cables are set up, lock your string lights in place with cable ties.

How do you hang string lights outside without trees?

7 Ways on How To Hang String Lights in Backyard Without Trees

1. Hanging Lights on 4X4 Posts.
2. Using Metal Pole and PVC. …
3. Along the Fence Lighting.
4. Deck Lighting.
5. Gazebo or Pergola or Covered Patio String Lights.
6. String Lights on Umbrella.
7. Use Planters to String Backyard Lights.

How do you attach lights to fascia board?

Push a clip onto the fascia board near the edge of the board with the hook for the light strand facing out. Clip the light strand into the hook. If you are using clothespins, hold the end of the light strand against the fascia board edge and clip it in place with the clothespin.

How do you hang string lights on a patio?

1. Step 1: Select Anchor Points. Lay string lights around the perimeter of your deck. …
2. Step 2: Install Screw Eyes. Predrill holes into the wood structural supports in your marked locations. …
3. Step 3: Attach String Lights with Carabiners. …
4. Step 4: Install Light Bulbs. …
5. Step 5: Attach String Lights to Power.

How do you hang Christmas lights without damaging them?

Install

1. Use light clips. Do not hang Christmas lights with screws, nails or even a staple gun. …
2. Attach your light clips. If your strands don’t already have light clips attached, attach them on the ground before you climb the ladder. …
3. Be careful.

How do you hang lights with Command Strips?

How do you hang outdoor lights?

How do you hang lights with nails?

Use nails, thumb tacks, or clear wall hooks to hang the lights up.

1. Match the color of the nail or thumb tack to the color of the wire.
2. Drive the nails or thumb tacks between the twisted wires. Never drive them through the wires.

How many strands of lights can be strung together?

In this case, most traditional incandescent Christmas mini lights only allow you to connect 4 or 5 sets end to end but with many LED mini light strings you can connect 40 to 50+ together depending on the light count. Consider your circuits: Most household circuits are 15 or 20 amps.

How many strands of lights can I connect together?

Therefore, your circuit can only handle 14 incandescent light strings connected together. On the other hand, if an average LED string light set uses 10 watts, then 1440/10=144. That means you can have 144 light strings connected together if they’re LED! That’s a lot more light than the incandescent.

How do you connect two strands of Christmas lights?

How do you hang string lights outside of a tree?

If you have trees, it’s easy to hang lights. Just drill a hole into a tree, install a cup hook, wrap the light around it and secure it with a zip tie. Or you can thread them through the branches and not anchor them. But, make sure you are close enough to a power outlet.

How do you hang outdoor string lights on a screened porch?

1. Step 1: Select Anchor Points. Lay string lights around the perimeter of your deck. …
2. Step 2: Install Screw Eyes. Predrill holes into the wood structural supports in your marked locations. …
3. Step 3: Attach String Lights with Carabiners. …
4. Step 4: Install Light Bulbs. …
5. Step 5: Attach String Lights to Power.

How do you hang outdoor siding lights?

All you need are these vinyl siding clips.

To attach them to the hooks, I just used an old wire coat hanger to loop through the screw holes in my boxes, twist, and hang them up. The little hooks made it really easy to string our outdoor lights to the corner of our house too.

How do you hang soffit and fascia lights?

How do you hang Christmas lights on the roof peak?

Climb higher along the peak to attach the next lights on the strand. Go slightly higher on your roof, and pull the light strand tight so it forms a straight line rather than bowing in between the clips. Slide clips underneath your shingles and set the bulbs in the rings until you’ve gone to the top of the peak.

How do you hang Christmas lights on fascia UK?

Hang outdoor Christmas lights on fascia board by first nailing in place flat plastic clips with hooks for the wires. Nail n Clip Light Clips is one example of a suitable product, but other similar products may be available. The nail ensures the clip does not move and the hook keeps the wire in place.

How do you hang string lights without nails?

Luckily there are a number of alternative ways to hang or display fairy lights.

1. Drawing Pins. …
2. Blu-Tack. …
3. Wrapping around household objects. …
4. Wire Suckers. …
5. Damage-free Adhesive Hooks.

Can you hang string lights with a staple gun?

Using a staple gun to attach holiday lights is an action that will get you on the naughty list. … Not only will staples damage your home, you could also damage the lights. One staple misfire can ruin an entire strand of lights. So, the first rule for safe decorating: Put down the staple gun.

How do you hang lights outside without nails?

However, is there any way to hang them up without putting nails into the wall? One of the ways to hang outdoor patio lights without nails is using adhesive hooks or gutter hooks. Alternatively, you can tape or staple them to your wall. You can also hang them on trees, bushes, posts, potted plants, and your fence.

Sharing is caring, don’t forget to share this post !