How do you fasten outdoor string lights?

How do you fasten outdoor string lights? How to Hang Outdoor String Lights from Trees

1. First, measure the distance from tree to tree where you want to hang the lights. …
2. Drill guide holes on the trees where you want to hang the lights. …
3. Install a hook into each tree at the marked spot. …
4. Thread the string lights onto the hooks.

Likewise, How do you hang string lights on a patio?

1. Step 1: Select Anchor Points. Lay string lights around the perimeter of your deck. …
2. Step 2: Install Screw Eyes. Predrill holes into the wood structural supports in your marked locations. …
3. Step 3: Attach String Lights with Carabiners. …
4. Step 4: Install Light Bulbs. …
5. Step 5: Attach String Lights to Power.

Thereof, How do you hang string lights outside without trees? 7 Ways on How To Hang String Lights in Backyard Without Trees

1. Hanging Lights on 4X4 Posts.
2. Using Metal Pole and PVC. …
3. Along the Fence Lighting.
4. Deck Lighting.
5. Gazebo or Pergola or Covered Patio String Lights.
6. String Lights on Umbrella.
7. Use Planters to String Backyard Lights.

How do you hang string lights without holes?

Using Hooks

If you can’t repurpose your backyard to hang the lights, then the next best option is to go with adhesive hooks. They can be bought at any hardware store and allow you to hang lights without leaving nail holes in your walls.

How do you hang Christmas lights without gutters?

Hang the lights pointing up or down, just make sure they’re all clipped in the same direction. If you don’t have gutters, you can use the same clip to attach lights to your shingles instead. Simply flip the clip around.

Can you hang string lights with a staple gun?

Leave a little slack at the area closest to the power source and use a staple gun with ¼-in. staples to attach the string lights closest to the power source. … Pull the cord taught, but not tight, and continue stapling the string lights along your path.

How many feet of string lights do I need for patio?

Simply buy string lights that are 2 to 6 feet longer than your linear measurement to create the swag of your choice. It’s always better to have more string length than you need because you can always shorten it by doubling it up on the ends.

Can you hang Christmas lights with a staple gun?

Using a staple gun to attach holiday lights is an action that will get you on the naughty list. … Not only will staples damage your home, you could also damage the lights. One staple misfire can ruin an entire strand of lights. So, the first rule for safe decorating: Put down the staple gun.

What kind of pole do you use for string lights?

Long vertical poles secured with concrete footings are an easy way to support twinkling string lights and are sturdy enough to stay up for the entire summer season. A little carpentry work and a few basic supplies are all that’s required, and this DIY project can be done in one day.

How can I light my backyard at night?

14 Lighting Ideas for the Perfectly Bright Backyard

1. Mix Up Different Lighting Styles. …
2. Uplight Trees to Create a Moonlight Effect. …
3. Illuminate Walkways. …
4. Sprawl Light Orbs Across the Fence. …
5. Light Up Water Features. …
6. Plant Tiki Torches. …
7. String Lights Up Tree Trunks and Branches. …
8. Create Shadows with Spotlights.

How do you hang lights with Command Strips?

How do you hang lights with nails?

Use nails, thumb tacks, or clear wall hooks to hang the lights up.

1. Match the color of the nail or thumb tack to the color of the wire.
2. Drive the nails or thumb tacks between the twisted wires. Never drive them through the wires.

How do you hang string lights on aluminum?

How do you hang Christmas lights without a ladder?

How much does it cost to hang Christmas lights?

On average, homeowners pay $413 for professional installation of their exterior holiday lighting, with a typical range between $218 and $649. The light strands alone cost between $80 and $300. Installation adds another $120 to $500 to your budget.

Can you staple lights to a tree?

Tree lighting displays often rely on a staple gun to affix lights. Staples will not harm mature trees with thick bark, but many downtown street trees are younger and smaller with thin bark. A staple may not seem like a big injury but dozens of staples can add up to a bigger impact, especially when done annually.

How do you hang lights on house siding?

Use Vinyl Hooks

The design has a top and bottom part with the top slipping underneath the vinyl siding. The siding will then hold the hook in place. Once you have placed these hooks where you want them, you just string your lights. make sure the plug is the part that is closest to the outlet.

How do you hang lights on a fence without nails?

One of the ways to hang outdoor patio lights without nails is using adhesive hooks or gutter hooks. Alternatively, you can tape or staple them to your wall. You can also hang them on trees, bushes, posts, potted plants, and your fence. Another way to brighten up your patio is by using lanterns.

What are outdoor string lights called?

If you’re considering adding some of these lights to your backyard patio, you’ve probably seen this type of lighting called many things including fiesta lights, party lights, string lights, and even festoon lights.

How high should you hang string lights?

For most string lights, about eight to 10 feet is perfect. If you have larger bulbs, you may want to hang the lights a little higher.

What staples to use for hanging Christmas lights?

The 5/16” x 5/16” staples should be large enough for most light strands and garland. Time to hang the decorations! Make certain that no lights are plugged into the outlets while securing to your porch. Use Arrow’s T59 insulated cable staple gun to secure the strands, fastening every 6 to 8 inches for a secure hold.

How do you hang Christmas lights on a house without gutters?

Hang the lights pointing up or down, just make sure they’re all clipped in the same direction. If you don’t have gutters, you can use the same clip to attach lights to your shingles instead. Simply flip the clip around.

How do you hang lights in a room without nails?

Luckily there are a number of alternative ways to hang or display fairy lights.

1. Drawing Pins. …
2. Blu-Tack. …
3. Wrapping around household objects. …
4. Wire Suckers. …
5. Damage-free Adhesive Hooks.

Sharing is caring, don’t forget to share this post !