How much does it cost for Christmas light installation? Christmas Light Installation Pricing
On average, homeowners pay $414 for professional installation of their exterior holiday lighting, with a typical range between $218 and $650. The light strands alone cost between $80 and $300. Installation adds another $120 to $500 to your budget.
Then, How do you hide unwanted Christmas lights?
Secondly, How many feet of Christmas lights do I need for my house? When decorating your house eaves, a simple rule is to start with at least 60 feet of string lights. Add another 10 to 12 feet for every awning you plan to light. If you have the time and patience, you can measure your eaves and awnings with measuring tape to get the most precise necessary length of string lights.
How much does it cost to get lights on your house?
Most holiday light installations cost between $200 and $400 on average, nationwide. Pricing depends on a range of factors including where you want the lights hung, the square footage of your property, whether you’ll need the installer to provide the lights, and whether you will also want the lights removed.
How much Christmas lights do I need for my house?
General Rule: For heavy lighting, plan for around 200 mini Christmas tree lights per vertical foot-and-a-half of tree. If you prefer medium lighting, 100 mini lights per foot should be enough.
Can I cut off extra Christmas lights?
Short Answer: No, you can’t lengthen or shorten standard series-wired incandescent and LED Christmas tree light strings that are made with 2 or 3-wire harnesses. Even if they work at first, they won’t last long.
Why do Christmas lights have 3 wires?
The string of light is designed to daisy chain. The end of one can plug into the start of the next one. The lights are in series between the neutral at one end and the hot at the other end. Thus three wires – hot, neutral, and the series lights.
Can you cut off extra string lights?
Yes, it is possible to cut string lights to the desired length, but you cannot plug them in until you are sure they have been cut and repaired. … Make sure the string lights are unplugged before you try to change the length. If this precaution is not taken seriously, there is a risk of electrocution.
How many strands of Christmas lights do I need?
How many strands do I need? A good rule of thumb is 100 lights for every 1.5 feet of tree. However, if you love lights, you may want to double, or even triple, that amount.
Should you tape Christmas light connections?
Don’t assume all lights are designed for outdoor use; wrap all connections between strings with electrical tape to keep moisture out. Always plug lights into a covered outlet protected with a ground-fault circuit interrupter (GFCI)—running cords from inside the house through a window or a mail slot is a fire hazard.
Are LED Christmas lights better?
LED Christmas lights use light-emitting diodes, rather than filament, to produce light. This makes LED lights more efficient, durable, and longer-lasting than fluorescent incandescent lights. They don’t burn out, like other bulbs; and they also don’t get hot to the touch, so they’re a lot safer, too.
When should you put up Christmas lights?
Most people say to wait until at least the second or third week of November until installing your Christmas lights. This gives you enough time to take down the Halloween decorations and put up the Christmas decorations. If you’d prefer, you may also choose to wait until after Thanksgiving.
How long do permanent Christmas lights last?
Just Don’t Expect Too Much
So here’s an honest answer to the question: A string of top-quality, professional-grade Christmas lights can reasonably be expected to last for roughly 6 or 7 seasons. That assumes that the lights are removed and stored during the off-season, and not left up year-round.
How long does it take to put up Christmas lights?
How long does it take to install exterior Christmas lights professionally installed? (typical installation) Get Free Quotes Today! Top Answer (35% of 34 votes): 2 – 4 hours. Explanation: Our projects range from 10,000 lights to over 1 Million lights.
How do I light my house for Christmas?
What is the difference between C9 and C7 bulbs?
C7 bulbs are smaller than C9s. They have an E12 candelabra base, the same size as a night light bulb. … C9 bulbs are larger, over 2 inches long, and fit an E17 base. They are usually available in 7 or 10 watts for incandescent bulbs and are generally used in the same ways as a C7 bulb.
How are Xmas lights wired?
Christmas lights are wired as a “series” of lights along a single electrical path. … There are two wires attached to the base of each bulb socket – one can be thought of as electricity “in” and the other is electricity “out”. The bulb provides the connection between the “in” and “out” wires.
What to do with extra Xmas lights?
Why do Christmas lights all go out when one bulb blows?
In this setup, when a filament within any one bulb blows out, it creates an open circuit in the wiring. As we mentioned earlier, when a circuit is incomplete, or open, electricity fails to pass through any of the wire, causing all the lights to go out.
How many Christmas lights can be connected together?
In this case, most traditional incandescent Christmas mini lights only allow you to connect 4 or 5 sets end to end but with many LED mini light strings you can connect 40 to 50+ together depending on the light count. Consider your circuits: Most household circuits are 15 or 20 amps.
How do Christmas lights work with two wires?
There are two wires attached to the base of each bulb socket – one can be thought of as electricity “in” and the other is electricity “out”. The bulb provides the connection between the “in” and “out” wires.
Sharing is caring, don’t forget to share this post !
