How do you hide unwanted Christmas lights?
Then, How much do Christmas lights cost?
On average, Christmas lights cost between $80 and $300. That’s based on a price of $4 to $30 per strand. Most strands feature 100 to 200 bulbs. Expect to use 10 to 20 strands to cover an average-sized home between 1,000 and 2,000 square feet.
Secondly, Why do Christmas lights have 3 wires? The string of light is designed to daisy chain. The end of one can plug into the start of the next one. The lights are in series between the neutral at one end and the hot at the other end. Thus three wires – hot, neutral, and the series lights.
What do you do if your Christmas lights are too long?
What am I supposed to do? Unfortunately, there isn’t too much that can be done at the end of a run if there are a few leftover inches/feet of Christmas light strings. Wind them up, secure the coil with electrical tape and tuck the rest of the light string out of the way. Wire ties can be handy at times like this.
How do professionals install Christmas lights?
Do LED lights raise electric bill?
LED strip lights do not cost a lot of electricity compared to traditional incandescent lights. Consumption is directly determined by the length of the strip light and its light density. A standard 5-meter strip will cost less than $3 a year to run, on average.
How much does it cost to run 24/7 Christmas lights?
These lights draw 130 Watts constantly. This translates to 0.13 kWh per hour, or 3.16 kWh per day and 97.96 kWh per month, with an additional electrical cost of $12.73.
Are Christmas lights expensive to run?
A string of 25 incandescent C9 bulbs — the big plump ones often used outdoors — uses 175 watts of electricity, which works out to a whopping $15.12 to run over a season (assuming 12-hour-a-day operation for 45 days). … If you swap those out for LEDs, your electricity cost shrinks to a little over 80 cents.
Why do Christmas lights all go out when one bulb blows?
In this setup, when a filament within any one bulb blows out, it creates an open circuit in the wiring. As we mentioned earlier, when a circuit is incomplete, or open, electricity fails to pass through any of the wire, causing all the lights to go out.
How do Christmas lights work with two wires?
There are two wires attached to the base of each bulb socket – one can be thought of as electricity “in” and the other is electricity “out”. The bulb provides the connection between the “in” and “out” wires.
Can I splice Christmas lights together?
Never splice multiple strands of Christmas tree lights together unless you are sure the wire is rated to carry the voltage safely. If the wires for your Christmas tree lights have a damaged portion, you may want to cut the wire to remove that portion and splice the good pieces of wire back together.
Can you cut off extra string lights?
Yes, it is possible to cut string lights to the desired length, but you cannot plug them in until you are sure they have been cut and repaired. … Make sure the string lights are unplugged before you try to change the length. If this precaution is not taken seriously, there is a risk of electrocution.
How are Xmas lights wired?
Christmas lights are wired as a “series” of lights along a single electrical path. … There are two wires attached to the base of each bulb socket – one can be thought of as electricity “in” and the other is electricity “out”. The bulb provides the connection between the “in” and “out” wires.
Can you cut curtain lights?
The vertical strings of the curtain lights can be cut to the length you want and will not affect the use.
What is the difference between C9 and C7 Christmas lights?
C7 bulbs are smaller than C9s. They have an E12 candelabra base, the same size as a night light bulb. … C9 bulbs are larger, over 2 inches long, and fit an E17 base. They are usually available in 7 or 10 watts for incandescent bulbs and are generally used in the same ways as a C7 bulb.
What’s the difference between C6 and C9 lights?
C6 lights are the smallest of the strawberry-shaped lights that many consider the “traditional Christmas bulb” shape. … C9 lights have the same traditional strawberry shape as C6 and C7, but are slightly larger than C7. C9 lights measure 1 1/4 inches in diameter and 2 1/2 inches tall.
How do you attach Christmas lights to the peak of the house?
Climb higher along the peak to attach the next lights on the strand. Go slightly higher on your roof, and pull the light strand tight so it forms a straight line rather than bowing in between the clips. Slide clips underneath your shingles and set the bulbs in the rings until you’ve gone to the top of the peak.
Do LED strips attract bugs?
Summary: Because different types of bugs see different wavelengths, it is never guaranteed that an LED light won’t attract them. … LED lights produce little to no UV light and a minuscule amount heat, which makes them less attractive to bugs—so long as they emit longer wavelengths of light.
What are the disadvantages of LED lights?
What are the disadvantages of LEDs?
- High up-front costs.
- Transformer compatibility.
- Potential color shift over lamp life.
- Performance standardization has not yet been streamlined.
- Overheating can cause reduced lamp life.
What uses the most electricity in a house?
The Top 5 Biggest Users of Electricity in Your Home
- Air Conditioning & Heating. Your HVAC system uses the most energy of any single appliance or system at 46 percent of the average U.S. home’s energy consumption. …
- Water Heating. …
- Appliances. …
- Lighting. …
- Television and Media Equipment.
What uses the most electricity in a home?
Here’s a breakdown of the biggest energy use categories in the typical home:
- Air conditioning and heating: 46 percent.
- Water heating: 14 percent.
- Appliances: 13 percent.
- Lighting: 9 percent.
- TV and Media Equipment: 4 percent.
Do LED Christmas lights use a lot of electricity?
Yes! LED lights consume 80-90% less energy than incandescent bulbs, and last up to 100,000 hours, versus 3,000 hours for an incandescent. Combine this with the durable construction of LEDs, and savings extend beyond electricity.
Do LED Christmas lights save money?
But switching to the more energy-efficient LED lights isn’t a complete no brainer. … But LEDs will save you money in the long run, because of the electricity bill. They consume 80 percent less energy than incandescent lights and tend to last 25 times longer, according to the U.S. Department of Energy.
Sharing is caring, don’t forget to share this post !
