Do you put lights on Christmas tree first? Start with the lights first
The first, most important thing you need to do when decorating your Christmas tree, is to always add the lights first – it’s more difficult to do this after you’ve added decorations like baubles and garlands.
Likewise, What goes first on a Christmas tree?
Placing Lights on the Tree
Lights go on the tree first, before ornaments, tree toppers or anything else. Plug them in and leave them lit before you start to put them on the tree. Most stores now sell special light test guns, for usually about $20.
Thereof, How many lights should I put on a 6 foot Christmas tree? “A good rule of thumb is 100 lights for every foot-and-a-half of tree,” according to Lowe’s. But Better Homes & Gardens recommends using three 100-light sets for every foot of a tree’s height. And Real Simple suggests 100 lights for every foot.
Do you put tinsel on before lights?
Yes! The only concrete rule here to but the lights on first before you put anything else one. It doesn’t really matter when you put the other stuff on. My advice is to just make sure the ornaments are really secured on the tree to make sure they don’t fall.
How many lights do I need for a 6ft Christmas tree?
For a basic look our number one rule is at least 100 bulbs per 1ft of tree – so that would mean a 6ft tree needs a minimum of 600 LEDs. For a fuller look, you can add as many lights as you want but we recommend upwards of 700 for a 6ft tree.
How many bulbs go on a Christmas tree?
Scatter these throughout the tree in prominent places. Then add something like red or green balls to fill in the rest of your tree. Be sure to balance ornaments by size, too. You don’t want one side of your tree to end up with all large or all small ornaments.
Should you put tinsel on your tree?
Adding tinsel to the Christmas tree can make for a pretty finishing touch, however, it pays not to go overboard. … She advises tinsel fans to either use the decoration very sparingly or go entirely tinsel-free as a way of allowing other ornaments ‘to shine’.
What is the correct way to put tinsel on a Christmas tree?
Do you string Christmas tree lights from top to bottom?
Plug in the lights to make sure all the bulbs are working. Starting at the top of the tree, intertwine the lights on top of and under branches. Work your way down and around the tree, hanging lights in the back as well. When you reach the bottom, hide any extra lights behind the tree.
How long should lights be on a 7ft Christmas tree?
How Many Lights Do I Need For A 7ft Tree? We recommend 15 metres of lights for a 6ft Christmas tree, but if you have space for a larger tree, for every extra foot of height simply add another 5 metres of lights. So for a 7ft tree, we would suggest using 20 metres of lights.
Are LED Christmas lights better?
LED Christmas lights use light-emitting diodes, rather than filament, to produce light. This makes LED lights more efficient, durable, and longer-lasting than fluorescent incandescent lights. They don’t burn out, like other bulbs; and they also don’t get hot to the touch, so they’re a lot safer, too.
What can I use instead of tinsel?
Instead of using tinsel, pick up some ribbon from your local arts and crafts shop. While you can get it fairly cheap, ribbon will make your tree look a lot more expensive. If you battle every year to get the star to hang on top of the tree, simply take a clear or white ball and cover it in battery powered fairy lights.
Is tinsel tacky?
THE best part of Christmas is by far decorating the tree, with baubles, tinsel and ornaments being decorations of choice. But as it turns out, tinsel is a decorating no-no, according to the experts, who say’ the age-old festive favourite looks “common and tacky”.
Does Garland go on first or last?
The lights would definitely be the First to go on the tree. You wouldn’t want to mess with dangling wires working over and around your ornaments. As for garland, some people put their garland on next, then their ornaments. I somehow find it easier to arrange the garland (beaded and ribbon) last.
How long should Christmas lights be on a 5ft tree?
We recommend as a guide you use approx 30 lights per foot in height of your Christmas Tree. For example, a 4ft. Christmas tree should have 120 Christmas tree lights, 5ft. tree 150 lights, 6ft tree 180 lights and a 7ft tree 210 lights.
Can you have too many lights on a Christmas tree?
But you don’t want to overdo it. A tree that’s too cluttered with lights will be overbearing, while a tree without enough lights will seem sparse.
How many lights do I need?
As a handy rule of thumb, a sitting room or bedroom will generally require around 10-20 lumens per square foot, while a bathroom or kitchen will need a stronger level of lighting, at around 70-80 lumens per square foot. To work out the lumens you need, simply multiply the square footage of the room by this figure.
How many strings of lights do I need for a 7 foot tree?
“A good rule of thumb is 100 lights for every foot-and-a-half of tree,” according to Lowe’s. But Better Homes & Gardens recommends using three 100-light sets for every foot of a tree’s height.
How many lights do I need for a 6ft slim Christmas tree?
For a 6ft tree we recommend 300 bulbs or 15 metres of lights. If you’re a fairy light lover, double up or mix and match styles for extra sparkle.
What should you not put on a Christmas tree?
The decorations on the tree can be poisonous to children and pets. Be sure to keep tinsel, garland, and greenery out of reach of small children and pets.
Do you put tinsel or lights on first?
To hide this ,find a wide bead garland or wide ribbon, tulle, tinsel, in a desired color go around the tree tuck against the frame to hide it. If you are doing lights on the tree yourself, install put the lights on the tree first then putting this on.
Do you put ornaments or ribbon on tree first?
Add ribbon before ornaments
Begin your tree decorating by adding lights and then the ribbon. Ornaments should always go on last. If you attempt to add ribbon after hanging ornaments, you run the risk of breaking ornaments as you style your tree. Now it’s time to grab your scissors and start ribboning.
Sharing is caring, don’t forget to share this post !
