How can I plug in my outdoor Christmas lights? Choose an outlet in your basement that is close to the window facing your outdoor Christmas lighting display. If you cannot control that outlet with a switch, then plug a power strip with an on/off switch into the outlet. That will allow you to turn your lights on and off from inside the house.
Likewise, How do you put an extension cord on Christmas lights?
Thereof, How can I plug my outdoor lights in without an outlet?
- The four ways to plug in Christmas lights without an outdoor outlet are: Use Battery Powered Lights. …
- Waterproof Extension Cords. …
- Heavy-Duty Extension Cords. …
- Be Careful About the Voltage. …
- Turn Off the Power Source. …
- Keep the Lights and Cords Away From Risky Areas. …
- Do Not Overload the Electrical Outlets.
How do you run power to outdoor string lights?
How do you connect Christmas lights together?
How do you make an outdoor extension cord?
How do you use an extension cord outside?
Outdoor Extension Cord Safety
- Pick the right cord. Cords are not one-size-fits-all. …
- Plug your outdoor extension cords into a GFCI outlet. …
- Make sure your cord is the right length (not too short/long), to prevent tripping hazards.
- Unplug the cord and store it indoors when it’s not in use.
How do you hide extension cords for outdoor string lights?
Start by attaching one end to the tree canopy (use the plug end to make it easier to hide the extension cord). If your lights don’t have built-in clips, use zip ties to secure. 6. String the lights along the branch towards the post; when you reach the post, wrap the wire around one of the hooks.
Can you plug outdoor lights inside?
To begin with, we state with all of our outdoor lights that the plug should either be plugged indoors, or in a weatherproof outdoor socket. If you do need to use a plug socket indoors then don’t worry, as most cables can easily be run through a window or door.
How do you connect Christmas lights to a battery?
You connect a 12V battery to the inverter, and then just plug your Christmas lights into the standard AC outlet on the inverter. It’s like a mini-power plant. You might choose to go this route if you already have a ton of regular (AC plug) Xmas lights and you don’t want to buy all-new battery-powered lights.
What type of cable is used for outside lights?
Once outdoors, you should supply your lights via 1.5mm² three core steel-wire-armoured cable (SWA). Make sure that you only fit weatherproof lights that are suitable for outdoor use and that your circuit is RCD-protected.
What happens if you plug too many Christmas lights together?
Because light strings have a maximum wattage capacity, which is why many string lights come with a little fuse just in case you connect too many together at once. The fuse is designed to blow so you don’t overload and damage your Christmas lights. … This happens when your wattage exceeds the amp capacity of the circuit.
How many strands of lights can you string together?
In this case, most traditional incandescent Christmas mini lights only allow you to connect 4 or 5 sets end to end but with many LED mini light strings you can connect 40 to 50+ together depending on the light count. Consider your circuits: Most household circuits are 15 or 20 amps.
How many strings of lights can you put together?
1440/100= 14.4. Therefore, your circuit can only handle 14 incandescent light strings connected together. On the other hand, if an average LED string light set uses 10 watts, then 1440/10=144. That means you can have 144 light strings connected together if they’re LED!
What gauge is a heavy duty extension cord?
A 10- to 12-gauge cord is for heavy and extra heavy duty applications (chainsaws, circular saws, shop vacs, air compressors, etc.). These are the heavier weight, and heavier duty cords designed for continual use on job sites, even in extreme weather, and are suitable for very high-amperage tools.
How much does it cost to make an extension cord?
It typically costs around $1.50 per foot.
What cable is used for extension leads?
Generally most extension leads use cable with a CSA of 1.5mm2, however there are some leads with smaller cables in service. As a general recommendation all extension leads (unless essential) should be restricted to 5m or less in length.
How do you know if an extension cord is for outdoor use?
Letter Designation. On the extension cord packaging or on the cord itself, the letter “W” indicates that the cord is designed for use outside. Outdoor extension cords have a heavy-duty appearance and tend to have tough, bright orange covers that are made from rubber, vinyl or plastic.
Can you leave outdoor extension cords in the rain?
An extension cord can survive the rain if it is rated for outdoor use and if it is in good condition. However, the plug should be kept out of the rain.
What type of electrical wire is used for outdoors?
Exposed or buried wiring must be listed for its application. (Type UF cable is the most commonly used nonmetallic cable for residential outdoor wiring runs.) UF cable can be direct buried (without conduit) with a minimum of 24 inches of cover.
Can you use an extension cord permanently?
Do not use extension cords as permanent wiring. If you find yourself using the same extension cord for more than 30 days, this may indicate a need for more permanent wiring. Do not run extension cords through holes in walls, ceilings, floors, doorways or other openings.
How do I hide connections on string lights?
Discreetly tape the ends of the strings, and their connections, to make them less visible and hold the lights in place. Try to connect to an extension cord near the tree base or the baseboard to enhance the illusion without drawing attention to how it works.
Are outdoor lights a fire hazard?
They’re not — unless they’re marked that way on the package. Lights designed for outdoor use are made to withstand cold and wet conditions. Indoor lights are safety tested so they’re not a fire hazard for trees, but they’re not durable enough for outdoors.
Sharing is caring, don’t forget to share this post !
